We
Should Listen To Bios Beep 
If the system is not booting, then
we should first listen to BIOS beeps.
It is the warning which means that devices attached
with the computer has gone bad or the BIOS itself is
not working properly. But beeps may vary from system
to system. It is so because now there are various BIOS
manufacturers present in the market. Moreover, these
manufacturers modify beeps are per their requirements.
Although, the standard BIOS beeps remains
same. Some of the examples are: One beep which means
RAM failure. The issue is with the mother board or the
failed RAM. If it beeps twice than it indicates parity
circuit failure. Same way, the issue is either with
the mother board or failed RAM. Three beeps mean base
64 K RAM failures. Then, four BIOS beeps
indicate system timer failure. The issue is one or more
of the system timers on the motherboard have failed
however, it may indicate motherboard failure as well
and we may need to replace it. Then, five deeps mean
processor failure. It has happened because it was generating
an error condition. But that doesn’t mean that the processor
is not working or it has dead but the computer will
not start. It is better if we check the processor if
it is overheating or whether it is set correctly on
the motherboard.
If the system boots with six BIOS beeps,
we can say that the keyboard controller or gate A20
has failed. It has happened because the keyboard controller
is not working or motherboard has some issue. In this
case, we should check if the key board is connected
properly or else we can use another keyboard. If the
system still gives BIOS beeps, we need
to look for the keyboard controller chip on the motherboard.
|
